Description
Item Description
Bryant Ridge Co. is pleased to present this double/single-action revolver today for a penny-start auction; this is the Smith & Wesson Model 625-3, also known as the Model of 1989 .45 Stainless.
This Smith & Wesson Model 625-3, Model of 1989 .45 Stainless, was produced in the first year of production.
SPECIFICATIONS:
Manufacturer: Smith & Wesson
Model: 625-3
Serial: BEN0863
Date of Manufacture: 1989
Caliber: .45 ACP
Finish: Glass Beaded Matte Stainless Steel
Barrel Length: 3" Barrel with Full Lug
Optics/Sights: Pinned Serrated Ramp Front with Adjustable Micrometer Click Rear
Stock/Grips: Finger Grooved Wood Grips with Inlaid S&W Medallions
Action: Double/Single-Action
Markings: Standard / The right side of the barrel is stamped “45 CAL MODEL OF 1989”.
Bryant Ridge's Analysis:
The Smith & Wesson Model 625, Model of 1989 .45 Stainless is a double/single-action N-frame revolver chambered in either .45 ACP or .45 Colt (not interchangeable), built on the round-butt N-Target frame with the traditional three-screw configuration. It features a six-shot fluted cylinder with a nominal length of approximately 1.55 inches. The model was originally introduced with a 5-inch full-lug barrel, with production including 3-inch and 4-inch barrel variants. Early examples were fitted with a round-butt N-Target frame with 10-groove serrated backstrap and forestrap, originally shipped with Pachmayr SN/GR grips before later transitioning to Hogue Monogrips. Sighting consists of a pinned, serrated black ramp front sight on a ramp base paired with a micrometer-click adjustable rear sight. Standard features include a .400" semi-target hammer, .312" smooth combat trigger, half-moon clip capability, and a non-glare glass-beaded matte stainless finish. The model’s introduction and nomenclature are somewhat unusual. The first production variant was designated with a dash-two (-2) engineering change, and early revolvers are found marked both “Model of 1988” and “Model of 1989.” A side-by-side comparison shows that the “Model of 1988” examples have traditional roll-stamped barrel markings, while the “Model of 1989” versions feature laser-etched markings. Aside from these markings, the two early variants are virtually identical in construction and appearance. In continuous production since 1989, the Model 625 has earned a strong following among revolver enthusiasts and competitors for its robust build quality, exceptionally smooth action, and reliable use of .45 ACP with or without moon clips—though extraction is significantly improved when clips are used.
Return Policy:
We gladly offer a 3-day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Model: 625-3
Serial: BEN0863
Date of Manufacture: 1989
Caliber: .45 ACP
Finish: Glass Beaded Matte Stainless Steel
Barrel Length: 3" Barrel with Full Lug
Optics/Sights: Pinned Serrated Ramp Front with Adjustable Micrometer Click Rear
Stock/Grips: Finger Grooved Wood Grips with Inlaid S&W Medallions
Action: Double/Single-Action
Markings: Standard / The right side of the barrel is stamped “45 CAL MODEL OF 1989”.
Bryant Ridge's Analysis:
The Smith & Wesson Model 625, Model of 1989 .45 Stainless is a double/single-action N-frame revolver chambered in either .45 ACP or .45 Colt (not interchangeable), built on the round-butt N-Target frame with the traditional three-screw configuration. It features a six-shot fluted cylinder with a nominal length of approximately 1.55 inches. The model was originally introduced with a 5-inch full-lug barrel, with production including 3-inch and 4-inch barrel variants. Early examples were fitted with a round-butt N-Target frame with 10-groove serrated backstrap and forestrap, originally shipped with Pachmayr SN/GR grips before later transitioning to Hogue Monogrips. Sighting consists of a pinned, serrated black ramp front sight on a ramp base paired with a micrometer-click adjustable rear sight. Standard features include a .400" semi-target hammer, .312" smooth combat trigger, half-moon clip capability, and a non-glare glass-beaded matte stainless finish. The model’s introduction and nomenclature are somewhat unusual. The first production variant was designated with a dash-two (-2) engineering change, and early revolvers are found marked both “Model of 1988” and “Model of 1989.” A side-by-side comparison shows that the “Model of 1988” examples have traditional roll-stamped barrel markings, while the “Model of 1989” versions feature laser-etched markings. Aside from these markings, the two early variants are virtually identical in construction and appearance. In continuous production since 1989, the Model 625 has earned a strong following among revolver enthusiasts and competitors for its robust build quality, exceptionally smooth action, and reliable use of .45 ACP with or without moon clips—though extraction is significantly improved when clips are used.
Return Policy:
We gladly offer a 3-day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping with Insurance $50.00
Long Gun Standard Shipping with Insurance $70.00
Any orders placed with magazines that are not compliant with your state, county, or city regulations will not ship with your order.
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Payment MUST be received within 14 days.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection. 
Additional Information
GunbrokerLink: |
https://www.gunbroker.com/item/1162984716 |
BidPrice: |
380 |
AuctionEndDate: |
2026-03-29 21:00:00 |
CurrentBid: |
1375 |
SoldOutTime: |
2026-03-29 17:31:48 |
