Description
Item Description
Bryant Ridge Auction Company is pleased to present this amazing semi-automatic rifle today for a penny-start auction, this is the Colt Law Enforcement Carbine (LE6920)!
Click here to view our other Live Auctions!
If you have missed out on this auction or are looking for a particular firearm, contact us. We have 100s of Collector Grade firearms (not on auction) in our inventory and available for immediate purchase.
Click here to let us know what firearms you are searching for!
This example showcases the authentic roll markings of the LE6920. These markings were used from approximately 1994 through 2011/2012 and read "COLTS LAW ENFORCEMENT CARBINE CAL. 5.56MM" with an LE serial number prefix. The right side magwell of these original LE6920 and LE Series carbines bears the restricted markings “RESTRICTED MILITARY/ GOVERNMENT LAW ENFORCEMENT/ EXPORT USE ONLY.”
According to the owner, this example is in new old stock condition!
SPECIFICATIONS:
Manufacturer: Colt
Model: Law Enforcement Carbine (LE6920)
Serial: LE047008
Caliber: 5.56 Nato / .223 Remington
Finish: Black
Barrel Length: 16.1" Barrel with 1:7 Twist and A2 Flash Hider
Optics/Sights: A2 Gas Block Post Front with Adjustable Aperture Carry Handle Rear
Stock/Grips: Collapsible Polymer Buttstock with Polymer Pistol Grip and Ribbed Polymer Handguard
Action: Semi-Automatic
Markings: Standard / The right side of the magwell is stamped "RESTRICTED / MILITARY/GOVERNMENT / LAW ENFORCEMENT/EXPORT / USE ONLY." The left side of the magwell is stamped "COLTS LAW ENFORCEMENT CARBINE."
Bryant Ridge's Analysis:
Colt released the LE6920 model in 1998. This firearm is very similar to the standard M4 that is used by the US military. The only differences are the barrel length, which is 16.1 inches instead of 14.5 inches, and the absence of the burst/auto fire control options.
The rifle's barrel measures 16.1 inches and comes with a standard A2 flash hider. It has a mil-spec 1/7-inch twist chrome-lined barrel that has undergone proof testing using a 70,000-psi proof cartridge and magnetic particle inspection to check for any stress fractures. The 16.1-inch barrel is ideal for carbine length and provides optimal performance with a wide variety of 5.56x45mm (.223 Rem) ammunition. The barrel also has an M4-style step in the front of the front sight assembly to attach a grenade launcher for law enforcement use with tear gas, smoke, and less-than-lethal ammunition. The front sight assembly is M4 spec (marked F on the left side of the front sight assembly) and sits higher than the standard front sight assembly to properly align the sights with the higher rear sight caused by the flat top upper receiver. The carbine has a side-mounted sling swivel attached to the barrel that comes from the factory on the left side but can be switched to the right.
The LE6920 comes equipped with a standard issue double heat shielded M4-type handguard that provides better protection to the shooter's hand from the heat of the barrel. However, you also have the option to install the standard carbine handguards or even more advanced rail systems such as the A.R.M.S., Inc. SIR (Selective Integrated Rail) System. The Colt M4 comes with a standard upper receiver that has a Mil-Std-1913 rail flat top. Both the receiver and the barrel extension feature extended feed ramps, which improve feeding reliability. The upper receiver is equipped with a detachable carrying handle that has a fully adjustable A2-style rear sight assembly. However, you can easily replace it with any other backup rear sight. The Mil-Std-1913 rail allows you to attach any optics of your choice to the carbine.
The carbine with plate number LE6920 uses a mil-spec M4 bolt that undergoes a test firing with a 70,000 psi-proof cartridge. After that, it is inspected for stress through magnetic particle inspection. The extractor is equipped with an M4 heavy black buffer and a stronger extractor spring that enhances its reliability and lifespan. This also increases the extraction force and makes the carbine more reliable. Starting from February 2005, all LE6920s will be equipped with the standard selective fire bolt carrier. This change is considered an improvement for a couple of reasons. Firstly, the extra mass of the carrier increases the firearm's reliability under adverse conditions. Secondly, the hammer and firing pin are protected, which reduces wear and tear. With the previous version of the bolt carrier, the hammer notch on top of the hammer would damage the firing pin, causing visible wear on the bottom of the bolt carrier over time.
The lower receiver of the gun has a mil-spec four-position telescopic buttstock with a longer butt in its current configuration. The sling swivel is located on the bottom. Although the buffer extension can accommodate any of the aftermarket stocks, the lower receiver uses Colt's proprietary .170-inch oversize hammer and trigger pins. These pins are designed to prevent illegal conversion to fully automatic mode.
Contents:
Model: Law Enforcement Carbine (LE6920)
Serial: LE047008
Caliber: 5.56 Nato / .223 Remington
Finish: Black
Barrel Length: 16.1" Barrel with 1:7 Twist and A2 Flash Hider
Optics/Sights: A2 Gas Block Post Front with Adjustable Aperture Carry Handle Rear
Stock/Grips: Collapsible Polymer Buttstock with Polymer Pistol Grip and Ribbed Polymer Handguard
Action: Semi-Automatic
Markings: Standard / The right side of the magwell is stamped "RESTRICTED / MILITARY/GOVERNMENT / LAW ENFORCEMENT/EXPORT / USE ONLY." The left side of the magwell is stamped "COLTS LAW ENFORCEMENT CARBINE."
Bryant Ridge's Analysis:
Colt released the LE6920 model in 1998. This firearm is very similar to the standard M4 that is used by the US military. The only differences are the barrel length, which is 16.1 inches instead of 14.5 inches, and the absence of the burst/auto fire control options.
The rifle's barrel measures 16.1 inches and comes with a standard A2 flash hider. It has a mil-spec 1/7-inch twist chrome-lined barrel that has undergone proof testing using a 70,000-psi proof cartridge and magnetic particle inspection to check for any stress fractures. The 16.1-inch barrel is ideal for carbine length and provides optimal performance with a wide variety of 5.56x45mm (.223 Rem) ammunition. The barrel also has an M4-style step in the front of the front sight assembly to attach a grenade launcher for law enforcement use with tear gas, smoke, and less-than-lethal ammunition. The front sight assembly is M4 spec (marked F on the left side of the front sight assembly) and sits higher than the standard front sight assembly to properly align the sights with the higher rear sight caused by the flat top upper receiver. The carbine has a side-mounted sling swivel attached to the barrel that comes from the factory on the left side but can be switched to the right.
The LE6920 comes equipped with a standard issue double heat shielded M4-type handguard that provides better protection to the shooter's hand from the heat of the barrel. However, you also have the option to install the standard carbine handguards or even more advanced rail systems such as the A.R.M.S., Inc. SIR (Selective Integrated Rail) System. The Colt M4 comes with a standard upper receiver that has a Mil-Std-1913 rail flat top. Both the receiver and the barrel extension feature extended feed ramps, which improve feeding reliability. The upper receiver is equipped with a detachable carrying handle that has a fully adjustable A2-style rear sight assembly. However, you can easily replace it with any other backup rear sight. The Mil-Std-1913 rail allows you to attach any optics of your choice to the carbine.
The carbine with plate number LE6920 uses a mil-spec M4 bolt that undergoes a test firing with a 70,000 psi-proof cartridge. After that, it is inspected for stress through magnetic particle inspection. The extractor is equipped with an M4 heavy black buffer and a stronger extractor spring that enhances its reliability and lifespan. This also increases the extraction force and makes the carbine more reliable. Starting from February 2005, all LE6920s will be equipped with the standard selective fire bolt carrier. This change is considered an improvement for a couple of reasons. Firstly, the extra mass of the carrier increases the firearm's reliability under adverse conditions. Secondly, the hammer and firing pin are protected, which reduces wear and tear. With the previous version of the bolt carrier, the hammer notch on top of the hammer would damage the firing pin, causing visible wear on the bottom of the bolt carrier over time.
The lower receiver of the gun has a mil-spec four-position telescopic buttstock with a longer butt in its current configuration. The sling swivel is located on the bottom. Although the buffer extension can accommodate any of the aftermarket stocks, the lower receiver uses Colt's proprietary .170-inch oversize hammer and trigger pins. These pins are designed to prevent illegal conversion to fully automatic mode.
Contents:
This example will ship with the matching factory-labeled box, a 30-round magazine, a sling, cleaning tools, and a manual!
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping with Insurance $50.00
Long Gun Standard Shipping with Insurance $70.00
Any orders placed with magazines that are not compliant with your state, county, or city regulations will not ship with your order.
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Payment MUST be received within 14 days.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection.
