Description
Item Description
Bryant Ridge Auction Company is pleased to present this 8" stainless steel barrel for the Dan Wesson Model 744-V today for a penny start auction!
Click here to view our other Live Auctions!
If you have missed out on this auction or are looking for a particular firearm, contact us. We have 100s of Collector Grade firearms (not on auction) in our inventory and available for immediate purchase.
Click here to let us know what firearms you are searching for!
SPECIFICATIONS:
Manufacturer: Dan Wesson
Model: 744-V
Caliber: .44 Magnum
Finish: Stainless
Barrel Length: 8" Stainless Ported & Vent Ribbed with Full Lug
Optics/Sights: Red Ramp Front
Bryant Ridge's Analysis:
The double-action revolver design introduced by Dan Wesson was invented by Karl R. Lewis. Lewis was responsible for a number of new firearms designs while working for various firearms manufacturers, including the Army's 40mm break-open grenade launcher and the .357 caliber Colt Trooper revolver. Lewis had previously invented an interchangeable barrel system for revolvers, and this system was incorporated into the Dan Wesson prototype. While nearly all revolvers are constructed with a barrel screwed tightly to a frame (which must be removed and installed by an experienced gunsmith), Lewis' idea was to house the barrel tube within a separate shroud secured by a nut at the muzzle, which places tension on the barrel and provides support at both ends of the barrel. By unscrewing the muzzle nut, the shroud and barrel could be removed and replaced with different barrel lengths and shroud configurations. The fact that the DW barrel is supported and placed under tension at both ends (along with the ability to fine-tune barrel-cylinder gap) resulted in markedly increased accuracy over conventional revolver designs.
In late 1980, after three years of development the Dan Wesson company introduced a large-framed revolver in .44 Magnum/Special caliber, intended for hunters and target shooters (especially metal plate or silhouette target competitions). Designed for extended use with full-power magnum loads, the new Model 44 used a larger and stronger frame than the Smith & Wesson Model 29 (M44 weight was 48 ounces with a 4-inch barrel), and featured a solid frame without a separate sideplate, which also increased strength. In addition to the one-piece frame, the Model 44 incorporated other new features designed to increase accuracy, such as broached rifling and choke-bored barrels.
The Model 44 or Large Frame Dan Wesson was initially offered with 4", 6", 8", or 10" interchangeable barrel/shroud options, and most guns shipped with a 6-inch barrel. A 2 1/2" barrel/shroud was later introduced, available as a separate option from the factory. Like the Model 15-2, the Model 44 could also be purchased with a variety of shroud configurations – either partial lug or full lug with a solid rib or ventilated-rib barrel.
Contents:
This example will ship in the Dan Wesson barrel box with non-matching characteristics seen pictured above!
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Model: 744-V
Caliber: .44 Magnum
Finish: Stainless
Barrel Length: 8" Stainless Ported & Vent Ribbed with Full Lug
Optics/Sights: Red Ramp Front
Bryant Ridge's Analysis:
The double-action revolver design introduced by Dan Wesson was invented by Karl R. Lewis. Lewis was responsible for a number of new firearms designs while working for various firearms manufacturers, including the Army's 40mm break-open grenade launcher and the .357 caliber Colt Trooper revolver. Lewis had previously invented an interchangeable barrel system for revolvers, and this system was incorporated into the Dan Wesson prototype. While nearly all revolvers are constructed with a barrel screwed tightly to a frame (which must be removed and installed by an experienced gunsmith), Lewis' idea was to house the barrel tube within a separate shroud secured by a nut at the muzzle, which places tension on the barrel and provides support at both ends of the barrel. By unscrewing the muzzle nut, the shroud and barrel could be removed and replaced with different barrel lengths and shroud configurations. The fact that the DW barrel is supported and placed under tension at both ends (along with the ability to fine-tune barrel-cylinder gap) resulted in markedly increased accuracy over conventional revolver designs.
In late 1980, after three years of development the Dan Wesson company introduced a large-framed revolver in .44 Magnum/Special caliber, intended for hunters and target shooters (especially metal plate or silhouette target competitions). Designed for extended use with full-power magnum loads, the new Model 44 used a larger and stronger frame than the Smith & Wesson Model 29 (M44 weight was 48 ounces with a 4-inch barrel), and featured a solid frame without a separate sideplate, which also increased strength. In addition to the one-piece frame, the Model 44 incorporated other new features designed to increase accuracy, such as broached rifling and choke-bored barrels.
The Model 44 or Large Frame Dan Wesson was initially offered with 4", 6", 8", or 10" interchangeable barrel/shroud options, and most guns shipped with a 6-inch barrel. A 2 1/2" barrel/shroud was later introduced, available as a separate option from the factory. Like the Model 15-2, the Model 44 could also be purchased with a variety of shroud configurations – either partial lug or full lug with a solid rib or ventilated-rib barrel.
Contents:
This example will ship in the Dan Wesson barrel box with non-matching characteristics seen pictured above!
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping $50.00
Long Gun Standard Shipping $70.00
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection.
