Description
Item Description
Bryant Ridge Co. is pleased to present this nice quality reproduction of an iconic semi-automatic rifle for a penny-start auction; this is the Israel Arms International (IAI) M1 Carbine!
SPECIFICATIONS:
Manufacturer: Israel Arms International (IAI)
Model: M1 Carbine
Serial: M888-R212055
Caliber: .30 Carbine
Finish: Parkerized
Barrel Length: 18"
Optics/Sights: Wing-Protected Blade Front and Adjustable Aperture Rear
Stock/Grips: Smooth Hardwood Stock
Action: Semi-Automatic Rifle
Markings: Standard
Bryant Ridge's Analysis:
The IAI M1 Carbine (often seen as the “M888” model among others) is a reproduction/semi-clone of the classic U.S. M1 Carbine, manufactured in the 1990s and early 2000s by Israel Arms International. It was built to mimic much of the form and function of the WWII-era carbines: gas-operated action (short-stroke piston), .30 Carbine chambering, detachable magazine (standard 15-round, though 30-round mags are also used), wood stock, adjustable rear sight, fixed post front blade, parkerized finish, and an overall length and weight close to the originals. Several parts were newly manufactured by IAI (receiver, barrel, operating rod), though many units included USGI and used WWII-style parts where available. One distinguishing feature of the IAI models is that its chamber tends to be made “slightly tighter” in many units, which can lead to somewhat improved groupings: users report around 2-inch to 2½-inch groups at 50 yards under good conditions versus the more typical 3- to 5-inch groups seen from many GI originals when fired with the same ammunition. Barrel length is commonly about 18 inches, bringing the overall length to roughly 35½-36 inches, and unloaded weight around 5.2-5.5 lbs, making it light and maneuverable.
Model: M1 Carbine
Serial: M888-R212055
Caliber: .30 Carbine
Finish: Parkerized
Barrel Length: 18"
Optics/Sights: Wing-Protected Blade Front and Adjustable Aperture Rear
Stock/Grips: Smooth Hardwood Stock
Action: Semi-Automatic Rifle
Markings: Standard
Bryant Ridge's Analysis:
The IAI M1 Carbine (often seen as the “M888” model among others) is a reproduction/semi-clone of the classic U.S. M1 Carbine, manufactured in the 1990s and early 2000s by Israel Arms International. It was built to mimic much of the form and function of the WWII-era carbines: gas-operated action (short-stroke piston), .30 Carbine chambering, detachable magazine (standard 15-round, though 30-round mags are also used), wood stock, adjustable rear sight, fixed post front blade, parkerized finish, and an overall length and weight close to the originals. Several parts were newly manufactured by IAI (receiver, barrel, operating rod), though many units included USGI and used WWII-style parts where available. One distinguishing feature of the IAI models is that its chamber tends to be made “slightly tighter” in many units, which can lead to somewhat improved groupings: users report around 2-inch to 2½-inch groups at 50 yards under good conditions versus the more typical 3- to 5-inch groups seen from many GI originals when fired with the same ammunition. Barrel length is commonly about 18 inches, bringing the overall length to roughly 35½-36 inches, and unloaded weight around 5.2-5.5 lbs, making it light and maneuverable.
The IAI M1 Carbine offers several advantages but also comes with trade-offs compared to genuine military vintage M1s. On the positive side, because many units were made relatively recently, finish, part tolerances, and wear tend to be better or more consistent than many war-worn originals. The tighter chamber, when properly matched with good ammo, can yield better accuracy out of the box. Replacement parts are generally more available or interchangeable (especially for common components), and many shooters like having a functioning M1 without having to deal with the higher cost or scarcity of some WWII models. On the downside, some users report that because of the tighter chamber, this model can be more picky about ammunition: under-power or low-pressure commercial loads may fail to cycle the action fully. Also, some IAI carbines incorporate newer components or non-original parts (non-USGI), which may affect collector value. Fit and finish, while good, may not always match the “good old war surplus” feel or the matching parts pedigree of high-grade originals. Finally, resale and collector value for IAI models is usually lower than for genuine WWII or well-documented GI M1 Carbines, though for a shooter rather than a collector, the IAI version is often a compelling, usable, and more affordable alternative.
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping with Insurance $50.00
Long Gun Standard Shipping with Insurance $70.00
Any orders placed with magazines that are not compliant with your state, county, or city regulations will not ship with your order.
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Payment MUST be received within 14 days.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection.
