Description
Item Description
Bryant Ridge Auction Company is pleased to present this stunning single-action revolver today for a penny start auction, this is the Interarms Virginian Dragoon!
Click here to view our other Live Auctions!
If you have missed out on this auction or are looking for a particular firearm, contact us. We have 100s of Collector Grade firearms (not on auction) in our inventory and available for immediate purchase.
Click here to let us know what firearms you are searching for!
SPECIFICATIONS:
Manufacturer: Interarms
Model: Virginian Dragoon
Serial: B00755
Caliber: .45 Long Colt
Finish: Blue & Color case hardened
Barrel Length: 6"
Optics/Sights: White dot on a serrated ramp front with Adjustable micrometer click rear
Stock/Grips: Smooth polished walnut
Action: Single-Action
Markings: Standard / Butt engraved "Dont Tread On Me" with a snake
Bryant Ridge's Analysis:
In 1976, production was assumed by Interarms Industries of Midland, VA. The decision to break ties with Hammerli was largely based on dollar depreciation, as experienced in the mid-1970s. In other words, as U.S. currency was devalued, it became unprofitable to import the Virginian. Sam Cumming’s solution involved a 25,000-square-foot plant that was built on the edge of a 350-acre farm. Ten of the 350 acres were for the production site, while the remaining 340 were farmed.
At its peak, the staff totaled around 70, with most of the workers being long-time residents of Fauquier County. Nonetheless, Midland was convenient for three reasons: 1) It’s right next to a major railway and rural airport, 2) It’s only an hour drive from the Interarmswarehouse in Alexandria, and 3) The 10 acre site provided room for expansion. At this time, the adjustable sight “Virginian Dragoon” was introduced in .44 Magnum, with the only finish being blued & color-case. While .357 Mags and .45 Colts were cataloged, they weren’t made until the late 70s or early 80s. It’s also rumored that the Midland plant produced a few fixed-sight Dragoons from 1976 to late 1977.
Unlike the old Hammerli guns, Interarms had the Hitchner Corporation cast a heavier frame to accommodate the .44 Magnum round. Once poured using either 4140 steel or 416 stainless, they were then shipped to Midland for final spec machining. In terms of strength and overall dimensions, these were very close to that of a Blackhawk, except the top-strap was more curved. A second noticeable difference was a slot that was cast about a quarter of an inch below the top of the frame.
This characteristic became a trademark of sorts for the Interarms Dragoon and it does make the gun easily identifiable. Another trademark is the engraving done on the bottom of the grip frame. Most Dragoons were inscribed with either “Don’t Tread On Me” with snake logos or the untranslated Virginia state motto “Sic Semper Tyrannis “.
This Interarms Virginian Dragoon is a replica of the Colt Peacemaker, which is chambered for .45 Long Colt. It features a 6" barrel with a blue finish on the barrel, cylinder, trigger guard, and grip frame. The color case-hardened frame gives it a classic western-style look. The revolver also sports polished smooth walnut grips, a white dot on a serrated ramp front sight, and an adjustable micrometer click rear sight. The butt of the firearm is inscribed with "Don't Tread On Me" and snake logos.
Contents:
This example will ship with the matching factory labeled box, genuine leather western style holster, and paperwork pictured above!
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Model: Virginian Dragoon
Serial: B00755
Caliber: .45 Long Colt
Finish: Blue & Color case hardened
Barrel Length: 6"
Optics/Sights: White dot on a serrated ramp front with Adjustable micrometer click rear
Stock/Grips: Smooth polished walnut
Action: Single-Action
Markings: Standard / Butt engraved "Dont Tread On Me" with a snake
Bryant Ridge's Analysis:
In 1976, production was assumed by Interarms Industries of Midland, VA. The decision to break ties with Hammerli was largely based on dollar depreciation, as experienced in the mid-1970s. In other words, as U.S. currency was devalued, it became unprofitable to import the Virginian. Sam Cumming’s solution involved a 25,000-square-foot plant that was built on the edge of a 350-acre farm. Ten of the 350 acres were for the production site, while the remaining 340 were farmed.
At its peak, the staff totaled around 70, with most of the workers being long-time residents of Fauquier County. Nonetheless, Midland was convenient for three reasons: 1) It’s right next to a major railway and rural airport, 2) It’s only an hour drive from the Interarmswarehouse in Alexandria, and 3) The 10 acre site provided room for expansion. At this time, the adjustable sight “Virginian Dragoon” was introduced in .44 Magnum, with the only finish being blued & color-case. While .357 Mags and .45 Colts were cataloged, they weren’t made until the late 70s or early 80s. It’s also rumored that the Midland plant produced a few fixed-sight Dragoons from 1976 to late 1977.
Unlike the old Hammerli guns, Interarms had the Hitchner Corporation cast a heavier frame to accommodate the .44 Magnum round. Once poured using either 4140 steel or 416 stainless, they were then shipped to Midland for final spec machining. In terms of strength and overall dimensions, these were very close to that of a Blackhawk, except the top-strap was more curved. A second noticeable difference was a slot that was cast about a quarter of an inch below the top of the frame.
This characteristic became a trademark of sorts for the Interarms Dragoon and it does make the gun easily identifiable. Another trademark is the engraving done on the bottom of the grip frame. Most Dragoons were inscribed with either “Don’t Tread On Me” with snake logos or the untranslated Virginia state motto “Sic Semper Tyrannis “.
This Interarms Virginian Dragoon is a replica of the Colt Peacemaker, which is chambered for .45 Long Colt. It features a 6" barrel with a blue finish on the barrel, cylinder, trigger guard, and grip frame. The color case-hardened frame gives it a classic western-style look. The revolver also sports polished smooth walnut grips, a white dot on a serrated ramp front sight, and an adjustable micrometer click rear sight. The butt of the firearm is inscribed with "Don't Tread On Me" and snake logos.
Contents:
This example will ship with the matching factory labeled box, genuine leather western style holster, and paperwork pictured above!
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping $50.00
Long Gun Standard Shipping $65.00
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection.
