Description
Attention: Please Read!!
It has been brought to our attention that the included black powder barrel in this listing will not function nor fit on either a Gen 1 or Gen 2 Contender frame. Encore barrels are not made to interchange with a Contender frame or vice versa. We apologize for any confusion that this may have caused.
Information above was added on 2/15/2023 2:21:38 PM
Item Description
Bryant Ridge Auction Company is pleased to present this incredible single-shot pistol today for a penny start auction, this is the the Thompson Center Contender!
This example also included a Custom Shop 15" Encore 209x50 Magnum barrel with wooden hand guard!
This example also included a Custom Shop 15" Encore 209x50 Magnum barrel with wooden hand guard!
SPECIFICATIONS:
Manufacturer: Thompson Center
Model: Contender
Serial: 365021
Caliber: .35 Remington &
Finish: Blue
Barrel Length: 14" "Super 14" with Factory Muzzle Brake
Optics/Sights: Mounted Leupold M8-4X Extended E.R. Scope
Stock/Grips: The Pachmayr "Gripper"
Action: Single-Shot
Markings: Standard
Bryant Ridge's Analysis:
The Thompson/Center Contender is a break-action single-shot pistol or rifle that was introduced in 1967 by Thompson/Center Arms. It can be chambered in cartridges from .22 Long Rifle to .45-70 Government. The most unusual feature of the Contender is how the barrel is attached to the frame. By removing the fore-end, a large hinge pin is exposed; by pushing this hinge pin out, the barrel can be removed. Since the sights and extractor remain attached to the barrel in the Contender design, the frame itself contains no cartridge-specific features. A barrel of another caliber or length can be installed and pinned in place, the fore-end replaced, and the pistol is ready to shoot with a different barrel and pre-aligned sights. This allowed easy changes of calibers, sights, and barrel lengths, with only a flat screwdriver being required for this change.
The Contender frame has two firing pins, and a selector on the exposed hammer, to allow the shooter to choose between rimfire or center fire firing pins, or to select a safety position from which neither firing pin can strike a primer. The initial baseline design of the Contender had no central safe position on the hammer, having only center fire and rimfire firing pin positions, each being selectable through using a screwdriver. Three variants of the original Contender design were later developed, distinguished easily by the hammer design. The first variant has a push button selector on the hammer for choosing rimfire vs. center fire, the second variant has a left-center-right toggle switch for selecting center fire-safe-rimfire firing pins, and the third variant has a horizontal bolt selection for choosing center fire-safe-rimfire firing pin positions. All three of these Contender variants have a cougar etched on the sides of the receiver, thereby easily distinguishing them from the later G2 Contender which has a smooth-sided receiver without an etched cougar.
Some of the very earliest Contenders, those requiring a screwdriver to switch the firing pin between rimfire and center fire, had smooth sides, without the cougar etched on the sides. The original Contender designs have an adjustable trigger, allowing the shooter to change both take-up and over travel, permitting user selection of a range of trigger pulls ranging from a fairly heavy trigger pull suitable for carrying the pistol while hunting to a "hair trigger" suitable for long range target shooting.
Condition and Contents:
As you can see in the many high resolution photos, this TC Contender is in Excellent condition showing no evidence of regular consumer use or handing that we can see! Additionally, it will ship with a 15"Encore 209x50 Magnum barrel with wooden hand guard, and two Uncle Mike's Sidekick holsters (Sizes 13 Scope & 11).
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Model: Contender
Serial: 365021
Caliber: .35 Remington &
Finish: Blue
Barrel Length: 14" "Super 14" with Factory Muzzle Brake
Optics/Sights: Mounted Leupold M8-4X Extended E.R. Scope
Stock/Grips: The Pachmayr "Gripper"
Action: Single-Shot
Markings: Standard
Bryant Ridge's Analysis:
The Thompson/Center Contender is a break-action single-shot pistol or rifle that was introduced in 1967 by Thompson/Center Arms. It can be chambered in cartridges from .22 Long Rifle to .45-70 Government. The most unusual feature of the Contender is how the barrel is attached to the frame. By removing the fore-end, a large hinge pin is exposed; by pushing this hinge pin out, the barrel can be removed. Since the sights and extractor remain attached to the barrel in the Contender design, the frame itself contains no cartridge-specific features. A barrel of another caliber or length can be installed and pinned in place, the fore-end replaced, and the pistol is ready to shoot with a different barrel and pre-aligned sights. This allowed easy changes of calibers, sights, and barrel lengths, with only a flat screwdriver being required for this change.
The Contender frame has two firing pins, and a selector on the exposed hammer, to allow the shooter to choose between rimfire or center fire firing pins, or to select a safety position from which neither firing pin can strike a primer. The initial baseline design of the Contender had no central safe position on the hammer, having only center fire and rimfire firing pin positions, each being selectable through using a screwdriver. Three variants of the original Contender design were later developed, distinguished easily by the hammer design. The first variant has a push button selector on the hammer for choosing rimfire vs. center fire, the second variant has a left-center-right toggle switch for selecting center fire-safe-rimfire firing pins, and the third variant has a horizontal bolt selection for choosing center fire-safe-rimfire firing pin positions. All three of these Contender variants have a cougar etched on the sides of the receiver, thereby easily distinguishing them from the later G2 Contender which has a smooth-sided receiver without an etched cougar.
Some of the very earliest Contenders, those requiring a screwdriver to switch the firing pin between rimfire and center fire, had smooth sides, without the cougar etched on the sides. The original Contender designs have an adjustable trigger, allowing the shooter to change both take-up and over travel, permitting user selection of a range of trigger pulls ranging from a fairly heavy trigger pull suitable for carrying the pistol while hunting to a "hair trigger" suitable for long range target shooting.
Condition and Contents:
As you can see in the many high resolution photos, this TC Contender is in Excellent condition showing no evidence of regular consumer use or handing that we can see! Additionally, it will ship with a 15"Encore 209x50 Magnum barrel with wooden hand guard, and two Uncle Mike's Sidekick holsters (Sizes 13 Scope & 11).
Return Policy:
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping $50.00
Long Gun Standard Shipping $65.00
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection.
