Description
Item Description
Bryant Ridge Co. is pleased to present this double-action/single-action revolver for a penny-start auction; this is the Smith & Wesson Model 686-4.
SPECIFICATIONS:
Manufacturer: Smith & Wesson / SW / S&W
Model: Model 686-4 (Distinguished Combat Magnum)
Serial: CBF9448
Date of Manufacture: Circa 1996 (Spec. Ord. Code 6211)
Caliber: .357 Magnum / .38 Special
Finish: Satin Stainless Steel
Barrel Length: 6" Full Underlug Stainless Steel Barrel
Optics/Sights: Red Ramp Front Sight w/ White Outline Micro-Adjustable Rear Sight
Stock/Grips: Custom Smooth Hardwood Finger-Groove Combat Grips w/ Inset Silver S&W Monogram Medallions
Action: Double-Action / Single-Action (DA/SA) w/ 6-Shot Swing-Out Cylinder and Target Trigger & Hammer
Markings: Left barrel stamped "SMITH & WESSON"; right barrel stamped "S.&W. .357 MAGNUM"; right frame stamped w/ four-line S&W registration address; right sideplate stamped w/ large S&W Trade Mark logo; frame cutout stamped w/ serial "CBF9448" and "686-4"; box end label stamped w/ matching serial "CBF9448".
Bryant Ridge's Analysis:
Introduced in 1980 on Smith & Wesson's medium-large L-frame platform, the Model 686 Distinguished Combat Magnum was engineered specifically to provide long-term durability when firing high-velocity .357 Magnum ammunition. Widely celebrated by collectors and shooters alike, the 686-4 engineering dash revision (produced from 1993 to 1998) is held in particularly high regard. The -4 modification represents the pinnacle of traditional S&W L-frame evolution: it introduced a factory drilled and tapped frame under the rear sight for optics mounting and a modern extractor design, while crucially retaining the desirable pre-lock frame profile and hammer-mounted firing pin architecture. This specific example bears serial number CBF9448 with Spec. Ord. code 6211, placing its production in approximately 1996. Featuring a 6-inch full underlug barrel, red ramp front sight, white-outline micro-adjustable rear sight, and custom smooth hardwood finger-groove combat grips adorned with silver S&W medallions, this revolver combines classic presentation with target-grade balance. The satin stainless steel finish remains in exceptionally clean overall condition, exhibiting minimal signs of handling or age. Mechanically, the cylinder locks up with precise tightness, action cycling is smooth in both double and single action, and the 6-inch bore displays bright, sharp rifling. Complete with its original factory serial-matching blue molded hard case, owner's manual, and product documentation, this S&W Model 686-4 represents a prime, pre-internal-lock centerpiece for Smith & Wesson revolver collectors.
Contents:
Model: Model 686-4 (Distinguished Combat Magnum)
Serial: CBF9448
Date of Manufacture: Circa 1996 (Spec. Ord. Code 6211)
Caliber: .357 Magnum / .38 Special
Finish: Satin Stainless Steel
Barrel Length: 6" Full Underlug Stainless Steel Barrel
Optics/Sights: Red Ramp Front Sight w/ White Outline Micro-Adjustable Rear Sight
Stock/Grips: Custom Smooth Hardwood Finger-Groove Combat Grips w/ Inset Silver S&W Monogram Medallions
Action: Double-Action / Single-Action (DA/SA) w/ 6-Shot Swing-Out Cylinder and Target Trigger & Hammer
Markings: Left barrel stamped "SMITH & WESSON"; right barrel stamped "S.&W. .357 MAGNUM"; right frame stamped w/ four-line S&W registration address; right sideplate stamped w/ large S&W Trade Mark logo; frame cutout stamped w/ serial "CBF9448" and "686-4"; box end label stamped w/ matching serial "CBF9448".
Bryant Ridge's Analysis:
Introduced in 1980 on Smith & Wesson's medium-large L-frame platform, the Model 686 Distinguished Combat Magnum was engineered specifically to provide long-term durability when firing high-velocity .357 Magnum ammunition. Widely celebrated by collectors and shooters alike, the 686-4 engineering dash revision (produced from 1993 to 1998) is held in particularly high regard. The -4 modification represents the pinnacle of traditional S&W L-frame evolution: it introduced a factory drilled and tapped frame under the rear sight for optics mounting and a modern extractor design, while crucially retaining the desirable pre-lock frame profile and hammer-mounted firing pin architecture. This specific example bears serial number CBF9448 with Spec. Ord. code 6211, placing its production in approximately 1996. Featuring a 6-inch full underlug barrel, red ramp front sight, white-outline micro-adjustable rear sight, and custom smooth hardwood finger-groove combat grips adorned with silver S&W medallions, this revolver combines classic presentation with target-grade balance. The satin stainless steel finish remains in exceptionally clean overall condition, exhibiting minimal signs of handling or age. Mechanically, the cylinder locks up with precise tightness, action cycling is smooth in both double and single action, and the 6-inch bore displays bright, sharp rifling. Complete with its original factory serial-matching blue molded hard case, owner's manual, and product documentation, this S&W Model 686-4 represents a prime, pre-internal-lock centerpiece for Smith & Wesson revolver collectors.
Contents:
This example will ship with the original Factory Serial-Matching Box and all other contents pictured above.
Return Policy:
We gladly offer a 3-day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Shipping Details
Handgun Standard Shipping with Insurance $50.00
Long Gun Standard Shipping with Insurance $70.00
Any orders placed with magazines that are not compliant with your state, county, or city regulations will not ship with your order.
We strive to ship orders within the close of the following business day after payment and documentation is received.
Payment Details
We accept all forms of Payment including Personal Check, Business Check, PO Money Orders, Certified Check, Etc.
Please note we place a 7 business day hold on shipment, for all non-certified payments.
Payment MUST be received within 14 days.
Return Policy
We gladly offer a 3 day unfired inspection policy from the time that the firearm is delivered to your FFL. Refunds are available for all qualifying orders.
Additional Details
Our #1 priority is customer satisfaction. We want to build a lasting trust in the relationship with our customers, so that you will always look to us for all your firearms needs. If you have any issues with your transactions please contact us, and we will work with you to resolve any issues you may have. We greatly appreciate your trust in us and we look forward to fulfilling all your future firearm needs.
Bryant Ridge also reserves the right to cancel any sales that may occur while gunbroker.com is experiencing technical issues that affects the entire site or a complete site outage, within an hour of the auction ending.
We have an amazing inventory of classic and collector firearms that we are adding to Gunbroker daily. Stay up to date on all of our latest auction by adding us to your favorite sellers list.
About Us
From a small town hobby, to a leader in the investment and collector grade firearms industry. Bryant Ridge Firearms is here to offer the best in quality and customer service when you are looking to unload your collector grade firearm collection. 
Additional Information
GunbrokerLink: |
https://www.gunbroker.com/item/1203962587 |
BidPrice: |
5.25 |
AuctionEndDate: |
2026-09-27 21:00:00 |
CurrentBid: |
440.79 |
